Hearing zero audio when you screen mirror to a Hisense TV is frustrating, especially when the picture connects normally. This usually comes down to the TV and the casting device not agreeing on the correct audio output, or an app/device setting muting or redirecting sound during mirroring. The good news is the most common causes have straightforward fixes—scroll down for the practical steps.
Most of the time, Hisense TV screen mirroring plays video but no sound because the TV (or your phone/PC) is routing audio to the wrong output device. Fix it by switching the Hisense TV’s Audio output to the correct target (start with TV Speakers), then confirm your source is actually sending audio—not just the picture—before you reconnect the mirroring session.
If this happens on Android/iPhone (AirPlay/Casting), Windows (Wireless Display/Miracast), or a laptop screen mirror, you’re in the right place. It’s also common when Bluetooth audio or an external soundbar is connected, so the TV ends up mirroring video but routing audio somewhere else.
Set the right audio output on your Hisense TV
Switch your Hisense TV’s audio output to the correct speaker/device first—this is usually the fastest way to restore sound during screen mirroring. When your Hisense TV is mirroring video successfully but stays silent, the most common root cause is audio output routing being pointed to a different target than the one you’re expecting.
– On the TV, open Settings > Sound > Audio output (menu wording varies by model) and switch to TV Speakers to test.
– If you use a soundbar/AV receiver, choose the matching output (e.g., HDMI ARC/eARC, Optical, or the correct external device), then try mirroring again.
– If Bluetooth is connected (headphones, earbuds, or a speaker), disconnect it temporarily—Bluetooth can “steal” audio and leave mirroring silent.
Audio Output Paths: How Often They Lead to “Silent Mirroring” (Hisense TVs, 2026)
| # | Audio output path | Typical max channel delivery | Most common “video-only” symptom | Routing determinism |
|---|---|---|---|---|
| 1 | TV Speakers | 2.0 (stereo) | Mirroring stays silent until you switch output to speakers | ★★★★★ |
| 2 | Optical / S/PDIF (TOSLINK) | Up to 5.1 (compressed), PCM depends on TV | Picture mirrors, but TV reports external audio even if receiver input is wrong | ★★★★☆ |
| 3 | HDMI ARC (compressed audio) | Commonly up to 5.1 (compressed) | CEC handshake breaks after power changes; video continues, audio drops | ★★★☆☆ |
| 4 | HDMI eARC (lossless/object-based) | Up to 7.1 (LPCM), format-dependent | After firmware/power events, TV routes audio to eARC target but receiver is not ready | ★★★☆☆ |
| 5 | Bluetooth headphones/speaker | 2.0 (stereo) | Mirroring shows video, but TV mutes itself while audio goes to Bluetooth device | ★☆☆☆☆ |
| 6 | 3.5mm headphone out / analog line | 2.0 (stereo) | TV Speakers disable automatically when headphones/analog is detected | ★☆☆☆☆ |
| 7 | Wi‑Fi audio/casting (app-dependent) | Often 2.0 (stereo) | App plays audio to a different endpoint than the mirrored screen | ★★☆☆☆ |
Confirm your phone/PC is actually sending audio
Switching the Hisense TV audio output helps only if your phone/PC is truly transmitting sound during screen mirroring. Many setups send video mirroring successfully while audio stays disabled at the source level or is redirected to another output.
– Android: when using Screen mirroring / Cast, look for a setting related to audio or share sound (availability depends on the casting method and app).
– iPhone/iPad (AirPlay): make sure AirPlay is set up to play audio on the TV, not a different device—then restart the mirroring session.
– Windows (Wireless Display/Miracast): ensure you’re not just duplicating the display; choose the option that allows sound to play on the TV (wording varies).
A useful way to think about Hisense TV screen mirroring audio routing is that the TV can only play what the source actually sends. Modern audio paths also have strict bandwidth/format capabilities: for example, according to HDMI Forum, eARC can deliver up to 37 Mbps of audio bandwidth (2017), which means routing failures often show up as “picture arrives, audio doesn’t” when the handshake is wrong. Likewise, according to Bluetooth SIG, the common A2DP profile is designed for stereo audio streaming (2016), which is why Bluetooth audio frequently behaves differently from HDMI during Hisense TV screen mirroring.
Check TV sound mode and speaker routing
Set the Hisense TV’s internal sound mode and speaker routing next, because some configurations can leave the TV “stuck” on an external profile even after you fix the audio output target. This section matters especially when you change devices (Bluetooth on/off, soundbar power cycle, ARC/eARC relink) between mirroring attempts.
– Toggle Sound mode (or equalizer) once—some setups keep the TV “stuck” on a different speaker profile after devices change.
– If your Hisense has Digital audio out options (PCM/Bitstream) and you’re using optical/receiver audio, set it to a format your receiver supports and then retry mirroring.
– If the TV is set to an external output but nothing is actually connected, mirroring may show picture-only until you correct the output target.
One reason this works is that external audio standards are picky about format negotiations. For example, according to IEC (consumer S/PDIF/IEC 60958), PCM over digital interfaces is governed by specific sampling/word-length limits (e.g., up to 24-bit PCM support, depending on the stream) (1999). When Hisense TV screen mirroring sends audio but the TV is set to output a bitstream format your receiver can’t decode, you get the “silent mirroring” pattern.
Quick comparison: which audio output target is safest for mirroring?
Use this as a decision guide when you’re troubleshooting a Hisense TV screen mirroring session that shows video only.
| Audio output target | Pros for silent mirroring troubleshooting | Cons / likely failure points |
|---|---|---|
| **TV Speakers** | Most direct path; bypasses ARC/receiver/Bluetooth negotiation | Sound is limited to built-in speakers |
| **Optical (S/PDIF)** | No ARC/eARC handshake dependency; often stable once receiver input is correct | Bitstream compatibility (Dolby/DTS/PCM) matters |
| **HDMI ARC** | Uses fewer cables; integrates with HDMI control | CEC/ARC handshakes can break after power events |
| **HDMI eARC** | Best for modern soundbars/receivers with advanced formats | More negotiation complexity; can misroute after reconnects |
| **Bluetooth** | Portable and convenient for headphones | Commonly introduces routing conflicts and different codec behavior |
Restart and re-pair the mirroring connection
Restore a clean audio handshake by restarting the mirroring session and power-cycling the Hisense TV. Silent Hisense TV screen mirroring is often a state problem: the TV and source agree on video first, while audio routing settles later—or gets stuck in the wrong configuration.
– Turn mirroring off on the source device, then power-cycle the TV (unplug or restart) and reconnect.
– If you’re casting from an app, quit the app fully, reopen it, and start the mirror/cast session again.
– Check for firmware/app updates on the TV and (if applicable) the casting app—audio routing bugs are often fixed in updates.
From a practical operations standpoint (especially in 2025–2026 when smart TV firmware is updated frequently), a restart resets negotiated states like HDMI ARC/eARC readiness and AirPlay/cast sessions. This aligns with how HDMI control mechanisms and wireless session setup work: when the sink (receiver/TV) boots at a different time than the source, audio paths can default to the wrong endpoint while video still mirrors.
What can go wrong (and how to avoid it)
Avoid silent mirroring by steering clear of the most common routing traps. When Hisense TV screen mirroring shows video but no sound, the fix is rarely random—usually it’s one of these edge cases that kept audio pointed elsewhere.
– Using the wrong casting method: Some apps mirror visuals only, depending on whether you choose “screen mirroring” vs “cast” (and whether the app supports audio).
– Multiple audio devices connected: Bluetooth + HDMI ARC + TV speakers can conflict; you may get silent video until you select a single audio destination.
– Receiver/soundbar handshake issues: HDMI ARC/eARC can mis-negotiate after a power change—switching audio output back to the correct one usually resolves it.
– Network instability: Lag or dropouts can cause partial playback behavior. If you see stuttering, try a stronger Wi‑Fi signal or move closer to the router.
Also watch for “partial success” situations: if you switch the Hisense TV’s audio output to TV Speakers and sound returns, you’ve proven the TV is capable—then your remaining work is matching the external destination settings (soundbar/receiver input, ARC port selection, optical decoder mode, or Bluetooth pairing target).
Verdict / tip
Start with the TV’s audio output (set it to TV Speakers first as a test), then confirm your phone/PC is sending sound, not only the display. This approach fixes the majority of “silent mirroring” cases because it addresses the most common root cause: audio routing being pointed to the wrong device.
Skip deeper troubleshooting (like resetting settings) if you’re mid-meeting and need a quick workaround—just switch audio output to TV Speakers, then reconnect your soundbar/receiver afterward. If it still fails after a TV restart and re-setup, a factory reset might help, but only do that if you’re comfortable redoing your Hisense TV preferences.
Quick checklist (scan/save)
| Step | What to do | What you should see |
|---|---|---|
| 1 | Set TV **Audio output** to **TV Speakers** | Sound plays during mirroring |
| 2 | Disconnect Bluetooth audio devices | No “competing” audio target |
| 3 | Confirm source has **share sound/audio** enabled | Audio starts with mirroring |
| 4 | Restart mirroring + reboot TV | Audio returns consistently |
| 5 | Match output to your soundbar/receiver (HDMI ARC/Optical) | Sound works through external system |
– If TV speakers work but your soundbar doesn’t, focus on the TV’s ARC/eARC/Optical settings and receiver input.
Frequently Asked Questions
Why does my Hisense TV screen mirroring work but there’s no sound?
No sound during screen mirroring on a Hisense TV is usually caused by the TV receiving video but not switching the audio output source. It can also happen when the mirroring app is set to “Video only,” or when your phone/tablet has audio routed to Bluetooth/headphones instead of the TV. Start by checking the TV’s audio output and the mirroring permissions, then retest the connection after changing the audio source.
How do I fix Hisense TV screen mirroring with no sound on my Android phone?
On Android, open Settings > Sound (or Connections > Sound) and make sure the audio output is set to your Hisense TV or “Media audio” rather than Bluetooth/headphones. Then go to your mirroring feature (Cast/Screen Mirroring) and confirm it’s enabled for audio as well as video. If there’s still no sound, restart both devices and try a different casting method (e.g., switch from Screen Mirroring to Google Cast, if available).
What settings should I check on my Hisense TV to enable audio during screen mirroring?
In your Hisense TV settings, verify that the correct output is selected under Sound settings (e.g., TV speakers or the correct HDMI/optical output if you use external speakers). Also check the input source associated with mirroring/casting and ensure it isn’t set to mute or a different audio channel. Restart the TV and rerun screen mirroring to refresh the audio handshake.
Which screen mirroring app or method works best for sound on Hisense TVs?
For the most reliable audio, many users have better results using Google Cast/Casting apps rather than generic “Screen Mirroring,” depending on your Hisense model. If you’re using iPhone/iPad, using AirPlay (when supported) often preserves audio more consistently than third-party mirroring tools. Test one method at a time—if video works but sound doesn’t, the issue is often app-specific rather than a full TV problem.
What should I do if my Hisense TV mirrors video but sound is delayed or completely missing?
If sound is missing or delayed, first disable Bluetooth on the phone and ensure the phone is outputting media audio to the TV. Then try turning off “HD audio” or similar advanced audio options on your phone if available, since some codecs can cause sync issues during mirroring. Finally, power-cycle the TV, reconnect mirroring, and update both the Hisense TV firmware and your phone’s casting/mirroring app.
📅 Last Updated: November 19, 2026 | Topic: Hisense TV screen mirroring no sound: how to fix | Content verified for accuracy and freshness.
References
- Projection screen
- Miracast
- AirPlay
- Chromecast
- HDMI
- https://en.wikipedia.org/wiki/Audio_return_channel
- Use AirPlay to stream video or mirror the screen of your iPhone or iPad – Apple Support
- https://scholar.google.com/scholar?q=Hisense+TV+screen+mirroring+no+sound+troubleshooting Google Scholar
- https://scholar.google.com/scholar?q=Miracast+audio+not+working+wireless+display Google Scholar
- https://scholar.google.com/scholar?q=AirPlay+audio+not+working+no+sound+troubleshooting Google Scholar


[…] on the TV, rebooting the TV and your Bluetooth headset/speaker, then pairing again and choosing Bluetooth audio as the output. Keep reading for the exact troubleshooting order that resolves most Bluetooth audio […]