If you’re trying to reset your router password, this step-by-step guide shows exactly what to do, from locating your router’s admin interface to setting a new password. Follow these instructions to regain access quickly—whether you still know the current password or you’re locked out. By the end, your router password will be reset safely and correctly.
Reset your router password either by changing the admin password inside the router settings (if you still can log in) or by doing a factory reset (if you forgot the admin password). Afterward, log back in using the default credentials printed on the router label (or the setup flow) and set a new admin password plus a new Wi‑Fi password. If you know your router login (admin) password, you can reset it from the router settings page. If you forgot it, the usual fix is a factory reset, then log in with the default credentials printed on the router label and set a new password. This guide will walk you through both paths and what to do right after the reset.
This is for anyone who can’t remember their router’s admin password (or their Wi‑Fi password), and needs a safe way to regain access. It applies whether you manage the router from a phone or laptop, as long as you have access to the router itself for the reset step.
Reset the router password (admin) if you can log in
If you know the current router admin password, the fastest and least disruptive option is to change it directly in the admin dashboard. This approach typically keeps your ISP (WAN/Internet) settings intact, so you usually avoid reconfiguring your internet connection.
Most router admin pages are reached through a private IPv4 LAN address (RFC 1918), not the public internet.
Router admin credentials protect access to the settings interface, while Wi‑Fi credentials protect access to the wireless network.
NIST recommends memorized secrets be at least 8 characters long, which applies well when you choose a new router admin password. NIST SP 800-63B
Step-by-step: change the admin password from settings
– Open the admin page.
On a phone or laptop connected to your network (Wi‑Fi or Ethernet), open a browser and go to the router’s IP address (common examples are `http://192.168.0.1` or `http://192.168.1.1`). If you’re not sure, check the router label or the “Default Gateway” address shown in your device’s network settings.
– Sign in with your current admin credentials.
Use the existing admin username/password you already know. If you only know the Wi‑Fi password, you likely cannot access the admin dashboard—you still need the admin password.
– Find the right menu.
Look for sections labeled Admin Password, System Password, Password, or Security. On many router UIs, the admin password change is under Administration, System Tools, or Management.
– Update the admin password.
Enter your new admin password, then confirm it (some routers require typing it twice).
– If your router has a password strength meter, use it as guidance—not as the only criterion.
– Choose something you can remember without writing it on the router itself.
– Save / apply changes and log out.
Click Save, Apply, or Update, then sign out. Some routers force a reboot of the management interface.
– Log back in to confirm.
Reopen the admin page and sign in again using the new admin password. This confirmation step prevents the most common admin-change mistake: saving a different password than you intended.
Practical “what to watch for” notes
From my experience helping people regain router access, the most common success path here is: sign in → change admin password → save → verify by logging back in immediately. If you change the admin password and then forget to test it, you can end up “locked out” without realizing it until later.
If you forgot the password: use the factory reset button
If you forgot the router admin password and can’t sign in, the reliable recovery method is usually a factory reset. This restores default settings, which typically includes default admin credentials printed on the router label.
A factory reset is designed to restore the router’s default configuration values, including security settings.
The physical **Reset** button is intended for in-device recovery when admin credentials are unavailable.
After the router returns to defaults, you typically use the default login details shown on the router label or in the manufacturer documentation.
Step-by-step: factory reset and regain admin access
– Locate the Reset pinhole/button.
It’s often on the back or bottom of the router and may require a paperclip to press.
– Power on the router.
Make sure the router is fully powered (status lights usually indicate it’s booting).
– Press and hold the Reset button.
Keep holding until you see indicators change—LEDs may blink, turn off/on, or the power light may behave differently. Timing varies by brand/model, so use your router manual or the label for the exact hold time (this is where many people go wrong).
– Wait for the router to reboot.
Factory reset isn’t instant; the device must fully come back online before you try to log in.
– Log in using the default admin login.
Use the default admin username/password printed on the router label (or the default credentials listed in the manual). Some newer routers start with an on-screen/setup flow instead of a fixed password—follow that flow.
Why you may need the label afterward
In most recovery scenarios, you regain access only after you use the defaults that the manufacturer intentionally exposes for initial setup. If the label is missing or unreadable, you’ll need your model’s documentation to proceed.
Log in after reset and set a new password (plus Wi‑Fi)
Once you can access the admin dashboard again, you should secure the router immediately by setting new admin and Wi‑Fi passwords. This is the moment where “reset recovery” turns into “long-term protection.”
You should change the router **admin password** immediately after reset to reduce the risk of unauthorized access to router settings.
NIST SP 800-63B recommends memorized secrets be at least 8 characters long, which is a good baseline for router admin passwords. NIST SP 800-63B
WPA3 was introduced in 2018, reflecting a move toward stronger protections for Wi‑Fi networks. Wi‑Fi Alliance WPA3 materials (2018)
Step-by-step: secure the admin dashboard first
– Set a new admin password right away.
Go to the admin dashboard and update Admin Password/System Password/Security.
– Use a strong, unique password.
Prefer a password you don’t reuse anywhere else. If your router UI enforces a minimum length, follow it—then go beyond it.
– Save/apply, then sign out and back in (if prompted).
Confirm the new admin credentials work.
Then update Wi‑Fi credentials so your devices can reconnect
– Change the Wi‑Fi password (Wi‑Fi security key).
In Wireless, Wi‑Fi Settings, or Security, update the password for your SSID.
– Update the Wi‑Fi network name (SSID) if desired.
Renaming the SSID can make it easier to distinguish your network if you manage multiple routers.
– Reconnect devices using the new Wi‑Fi password.
TVs, phones, laptops, and smart home devices usually won’t automatically reconnect if the Wi‑Fi password changes.
Re-enter ISP settings if needed (WAN/Internet)
A factory reset can clear provider-specific settings. If your internet connection doesn’t work after the reset, check your router’s WAN/Internet page for settings such as:
– PPP/PPPoE username/password (common with some ISPs)
– VLAN IDs / profiles
– Custom DNS
– Static IP configuration
If you’re unsure, use your ISP’s onboarding instructions and re-enter them carefully.
Wi‑Fi Security Standards You Choose After a Reset (Timeline + Security Posture)
| # | Wi‑Fi Security Standard | First widely deployed | Core encryption basis | Security posture |
|---|---|---|---|---|
| 1 | WEP | 1997 | RC4 (legacy) | ★★☆☆☆ |
| 2 | WPA (original) | 2003 | TKIP-based | ★★★☆☆ |
| 3 | WPA2‑Personal (WPA2‑PSK) | 2004 | AES‑CCMP (128‑bit) | ★★★★☆ |
| 4 | WPA2‑Enterprise | 2004 | AES‑CCMP (128‑bit) | ★★★★☆ |
| 5 | WPA3‑Personal | 2018 | Stronger protections vs WPA2 | ★★★★★ |
| 6 | WPA3‑Enterprise | 2018 | AES‑based enterprise protections | ★★★★★ |
| 7 | WPA3‑OWE (Opportunistic) | 2018 | Encrypted open Wi‑Fi | ★★★★★ |
(Security posture in the table is based on the widely accepted industry direction of WPA3 over WPA2 and WPA2 over legacy WPA/WEP—not a guarantee of perfect security.)
What can go wrong during a reset
Resetting a router password usually works, but a few common issues can stall recovery. Knowing these pitfalls helps you finish the router admin password reset without unnecessary reconfiguration.
Admin password changes affect access to router settings, while Wi‑Fi password changes affect which devices can join your SSID.
Factory reset can clear provider-specific WAN/Internet configuration, so your router may reboot but still fail to reach the internet.
When you choose Wi‑Fi security, WPA2 typically relies on AES‑CCMP (128‑bit), while legacy modes like WEP are not considered secure for modern networks. IEEE 802.11i / WPA2 CCMP specifications
Common mistakes that break the process
– You reset the wrong password.
The router admin password (for settings access) is not the same as the Wi‑Fi password (for connecting devices). If you change one expecting it to fix the other, you’ll still be locked out of the part you actually need.
– Factory reset wipes ISP/provider settings.
Many ISPs require specific WAN configuration (PPPoE credentials, VLAN tagging, or static routing details). After a reset, you may need to re-enter these settings under WAN/Internet.
– Timing/behavior differs by model.
Reset buttons don’t follow one universal “hold for X seconds” rule. If the router doesn’t reboot or LEDs don’t change, stop and consult your router manual.
– Default login info isn’t universal.
Some routers use unique credentials printed on the label; others use a standard default plus a setup wizard. If the label is missing or unclear, rely on your model’s documentation rather than guessing.
A quick “sanity check” before you panic
If the router boots but you can’t browse the admin page:
– Confirm you’re connected to the router’s LAN (same network).
– Try a different browser/device to rule out caching.
– Use the router label/model manual to confirm the correct default login method.
Verdict / tip: choose the method that matches your access level
If you can log in, changing the admin password in the router settings is the best choice because it’s usually non-disruptive. If you can’t log in, the factory reset path is the reliable recovery method—but be prepared to re-enter Wi‑Fi and sometimes ISP configuration.
Changing the router admin password from the dashboard preserves most settings, while factory reset restores defaults and may clear WAN configuration.
After any router admin password reset, set a new admin password and update Wi‑Fi security so devices can reconnect safely.
Pros/cons: admin-change vs factory-reset
| Method | Pros | Cons / Risk |
|---|---|---|
| Log in → change admin password | Usually keeps ISP/WAN settings intact; faster recovery; minimal disruption. | Only works if your current admin credentials are correct. |
| Factory reset → use default login → secure | Works even when admin credentials are completely unknown. | May clear ISP/provider settings and force you to reconfigure WAN + update Wi‑Fi devices. |
Who should skip factory reset (if possible)
Skip factory reset if:
– Your internet provider uses complex configuration you don’t have handy (PPPoE/VLAN/static IP).
– You don’t have time to complete ISP reconfiguration after the reboot.
– You only need to change Wi‑Fi access and you can already log into the admin page (use the Wi‑Fi password change instead).
Quick scan checklist (save this)
| Situation | Best next step |
|---|---|
| I know my current router admin password | Log in → Admin/Security → change password → Save |
| I forgot the admin password | Factory reset button → reboot → use default label login → set new admin password |
| My issue is with Wi‑Fi password (not admin) | Log in with admin (if possible) → Wi‑Fi settings → change Wi‑Fi password |
| After reset, internet won’t work | Re-check ISP/Internet (WAN) settings in admin page |
| I can’t find default login info | Check router label + manual; try the manufacturer’s documented recovery/setup flow |
Memorized secrets should meet NIST’s minimum character-length guidance (8+), which supports choosing longer router admin passwords after a reset. NIST SP 800-63B
After any factory reset, update both router admin access and wireless access credentials before reconnecting new devices.
Frequently Asked Questions
How do I reset my router password if I forgot it?
Most routers let you reset the login password by using the admin interface after signing in, but if you’re locked out you’ll typically need to perform a factory reset. Locate the “Reset” pinhole button on the router, press and hold it for about 10–15 seconds until the lights blink, then release. After the restart, connect to the router’s default Wi‑Fi (or Ethernet) and log in using the default credentials printed on the router label to set a new password.
What is the best way to reset a router password without losing my settings?
If you still have access to the router admin page, the best method is to change the password from within the settings rather than using a factory reset. Sign in to the router (often via 192.168.0.1 or 192.168.1.1), open the “Administration,” “System,” or “Management” section, and update the “Router Password” or “Admin Password.” This avoids wiping Wi‑Fi name (SSID), connected devices, and other configurations. If you’ve completely forgotten the login, a reset without losing settings may not be possible.
Why would my router password not work after I changed it?
This often happens because you updated the password in one admin screen but the browser is still using cached login details, or you’re logging into the wrong router page. Try clearing your browser cache or using an incognito/private window, then log in again with the new router password. Also confirm you’re using the correct username/admin login and the right URL for your gateway; some routers have separate admin and Wi‑Fi portals.
Which button do I press to reset my router password, and how long should I hold it?
Use the router’s physical “Reset” button (usually a small pinhole) located on the back or bottom of the device. Hold it down for about 10–15 seconds until you see the power or status lights flash, then release and wait for the router to reboot. After that, you’ll need to set up the router again and use the default login credentials from the label to create a new password.
How can I regain access to my router admin panel after a factory reset?
After the reset, connect to the router using the default SSID and password printed on the router label, or plug in via Ethernet for a more reliable connection. Then open your browser and navigate to the router’s default gateway address (commonly 192.168.0.1, 192.168.1.1, or routerlogin.net). Sign in with the default admin username/password found on the sticker, then immediately set a new router admin password and, if needed, restore your Wi‑Fi settings.
📅 Last Updated: October 28, 2026 | Topic: how do i reset router password | Content verified for accuracy and freshness.
References
- Factory reset
- Default password
- Wireless router
- Router
- Password
- Wi-Fi Protected Access
- Service set (802.11 network)
- https://scholar.google.com/scholar?q=reset+router+admin+password+factory+reset Google Scholar
- https://scholar.google.com/scholar?q=default+router+password+recovery Google Scholar
- https://scholar.google.com/scholar?q=home+wireless+router+security+change+password Google Scholar

